A washing machine is a workhorse in the family home. when the hard-working washing machine makes noise or doesn't provide the cleanest of clothing when it has completed a cycle, it may need a new agitator. replacing a washing machine agitator is a simple procedure with the right tools and know-how.. Remove the agitator, you need to lift it evenly and might have to work your way around by pulling on one of the three fins and then the next and so on. i also had luck using a small pair of needle nose pliers and grabbing a small lip inside the area where the screw was and pulling from there.. Is a washer with or without an agitator better? with cleaning performance, energy efficiency, capacity, innovation and convenience being roughly equal, it all boils down to your personal preference. the choice is yours..
Just pry off the cap on the top of the agitator. there is a bolt underneath the cap. remove the bolt. take a belt and loop it under the agitator and pull up. sometimes the agitators can be tough to pull off. usually a belt and a good grip will work. if you have anymore questions please feel free to. Source: maytag washer fabric softener dispenser is yucky there is a 1/4" machine screw in a recessed hole close to the bottom of the agitator. remove screw. lift agitator off agitate shaft. posted on nov 28, 2007. 3 remove the agitator on a maytag dependable care washer 4 repair a kenmore washer that won't agitate there are gaskets and seals around the agitator shaft and inside the agitator that can only be.
0 komentar:
Posting Komentar